Knowledge & FAQ
Selection, material comparison, construction, acceptance and pricing; standard-related content follows the current valid version and test reports.
Knowledge article list
How to choose geomembrane thickness: conditions to check before purchase
Thickness should not be chosen by experience alone; it is determined jointly by engineering medium, base conditions, puncture resistance, slope and design specifications.
Geotextile vs geomembrane: differences and where each is used
Geotextile is permeable for filtration, separation, reinforcement and protection; geomembrane is impermeable for containment; they are often used in composite or paired arrangements.
How to weld geomembrane: laps, weld inspection and construction points
Connection is mainly hot-melt welding; lap width, weld type and air/vacuum testing follow specifications, with caution in rain, low temperature and damp base conditions.
One-cloth-one-membrane vs two-cloth-one-membrane: how to choose
One-cloth-one-membrane eases integrated laying and lap protection; two-cloth-one-membrane protects the membrane on both sides with better puncture resistance, selected by base and protection requirements.
Where bentonite GCL is used: laying and construction notes
GCL swells on wetting to form a containment layer with some self-healing ability, mainly for landfills, underground works and landscape water; laps, joints and protection follow specifications.
Current geosynthetic standards: how to verify report versions before purchase
Geomembrane, geotextile and composite membrane each have corresponding national standards; standards may be revised, so verify the latest status through the official national standard system before acceptance.
Dimensions to evaluate when choosing a geosynthetic manufacturer
Consider whether the company has a real production base, follows current national standards, can provide inspection documents, has relevant application cases and offers after-sales and technical support.
Common application areas of geosynthetics in containment and slope works
Geomembrane, geotextile, composite membrane, GCL, drainage net and eco bags serve environmental solid waste, water conservancy, mine yards, aquaculture agriculture and ecological restoration.
What construction quality acceptance usually focuses on in containment works
Base acceptance, membrane slack control, lap welding, weld inspection, protective layer and joint sealing are common control points; acceptance requirements follow design documents and current codes.
Which technical documents to check during incoming material acceptance
Acceptance usually verifies standard number and year, thickness/weight, batch inspection documents and certificate of conformity; version and indicators follow the actual batch test file.
What determines geosynthetic pricing: what to confirm for a quotation
Price depends on material type, thickness/weight, width, quantity, standard, custom processing, transport distance and delivery time; without real-time pricing, the quote follows confirmed technical requirements.
Can specs, width and weight be customized: what to confirm before ordering
Some width, thickness, weight and composite structures can be negotiated per project; customization limits, MOQ and lead time are confirmed per product and order in writing.
How samples and inspection reports are provided and how to verify them
Samples can be arranged by process for regular products; inspection documents are provided by delivered batch. Verify standard number and year against the actual batch report.
How logistics and delivery are calculated: what to state in advance
Rolls ship by whole-truck road transport; freight and delivery are calculated by distance, road conditions and unloading conditions; state site access and unloading conditions for remote or mountain sites.
How issues are followed up after materials arrive on site
For spec checking, laying/welding or protection questions after delivery, contact the manufacturer for troubleshooting; warranty and after-sales scope follow the contract and confirmed technical requirements.
High-Frequency Q&A
Are you a manufacturer? What do you supply?
Dezhou Yurun Geotechnical Material Co., Ltd. is located in Lingcheng District, Dezhou, Shandong, supplying geomembrane, geotextile, composite geomembrane, bentonite GCL, composite drainage net, concrete carpet, eco bags, tunnel waterproof board, drainage board, woven bags and weed control fabric. Self-produced and sourced categories follow actual operations.
What is the manufacturer contact number?
Hotline 0534-8661234, mobile/WeChat 13969202278 (Mr. Zhao). We handle engineering procurement, bidding, site material selection and containment retrofit inquiries; please state project scenario, product category and spec, quantity and delivery address when calling.
Where is the company located?
The company is at the middle section of Wuyou Street, west side, Lingcheng Economic Development Zone, Dezhou, Shandong. Engineering procurement and project clients are welcome to visit by appointment.
Geomembrane or composite geomembrane: how to choose?
Use geomembrane alone when only containment is needed with a good base; choose composite geomembrane (one-cloth-one-membrane / two-cloth-one-membrane) when double-sided membrane protection and integrated filtration are required. Final choice follows base, slope and design.
What thickness geomembrane for different works?
Thickness is graded by work type, medium, water head or load, base conditions and puncture requirements; common containment works fall around 0.5mm–2.0mm. The design document governs, and indicators such as environmental stress cracking and oxidation induction time matter as much as thickness.
How to determine geotextile weight?
Weight should match the required strength, filtration and protection; heavier is not always better. Excessive weight adds unnecessary cost; selection follows loading conditions and design codes.
How to get a product quotation?
The quote requires material type, thickness or weight, width, quantity, applicable standard, whether custom, delivery region and delivery time. Contact 0534-8661234, 13969202278 (Mr. Zhao) or the online inquiry form; we reply after evaluating technical requirements.
Can specifications be customized?
Some widths, thicknesses, weights and composite structures can be negotiated per project drawings and requirements; customization limits, MOQ and lead time are confirmed with the specific product and order.
Can samples and inspection reports be provided?
Regular products can be sampled by process; inspection documents are provided by delivered batch. Indicators, report number and validity follow the actual batch test file.
Do you provide construction technical guidance?
We can communicate on material selection and construction notes, including selection advice, laying sequence and welding parameter ranges; design, construction responsibility and acceptance follow project drawings, construction codes and qualified contractors.
What is the supply scope and logistics arrangement?
Materials serve environmental, water conservancy, municipal, mining, aquaculture and agriculture works, shipped by whole-truck road transport; delivery method, lead time and freight are negotiated by project region and order quantity.
How to confirm whether products meet project standards?
Before ordering, provide the applicable standard number and year, thickness/weight and key indicators; we verify available specs and inspection documents. Standard version and indicators follow mutual confirmation and test reports.